Procure one Atmega328 chip with pre-burned Arduino Bootloader Replace the original chip in your Arduino board with this one Now upload the sketch to the 328 chip ,as usual, using Arduino IDE Remove ...

As you can see from that sketch and the circuit diagram, the LED is connected to the digital pin 13 of the Arduino. Once you verify (compile) the sketch and upload it to the Arduino board, you should ...

What was your first Arduino program? Probably an LED blinker — that seems to be the “hello world” of microcontrolllers. You probably moved on to things a little more complicated p… ...

I wanted to learn how to use the power management capabilities of the ESP32 processor and this is the sketch I created to help me learn. I'd been doing a lot of work sending HTTP and HTTPS requests ...

This usually takes not less than 30 seconds. So a 30 seconds delay is intentionally included in the sketch. For other type of sensors this is not necessary, thence remember to delete the line delay ...

I use that in a lot of Circuit VR posts so you can click on a circuit and see it live. However, the simulator does not save the source code in the virtual Arduino. You have to do that yourself.

There are many ways to do this, but on the Intel® Edison board, I found that the easiest way is using the /etc/init.d directory. If this is your first time using init.d for start-up scripts, you ...

Describe the request Sharing Arduino IDE sketches between users is pretty handicapped right now, because the sketch.yaml project file isn't yet supported in the IDE, and there is no way to share the ...