The data transmission interface in CSI is unidirectional differential serial interface with data and clock signals (the physical layer of this interface is the MIPI Alliance Standard for DPHY).

[Hounjini] was poking around at the Game Boy Advanced bus of his Nintendo DS lite and figured out how to use it to connect an Arduino to the DS. For testing he’s soldered an IDC plug to the c… ...

Looking for practical Arduino projects? This guide shows how to control a relay from your smartphone using an Arduino Uno — ...

It would be fun to test however, and I think it wouldn’t be too hard to hit at least 115,200 bits per second coming in over serial and being pushed out over the parallel port with the current setup.

The HSU interface needs only four wires to connect PN532 with Arduino (HSU uses 115200 baud rate), and in some Arduino boards (such as Leonardo, DUE, and Mega), there is more than one serial, so we ...

Interfacing Neo 6M GPS Module with Arduino Uno Build Time: 4-6 hours | Cost: $15-30 | Difficulty: Beginner-Intermediate What You'll Learn: Master UART serial communication, GPS data parsing with ...

Repository files navigation 🚗 CAN Bus Multi-Device Communication (Arduino + MCP2515) 🔧 Project Overview This project demonstrates how multiple Arduino boards can communicate over a Controller Area ...

This project is the simple interface between two microcontrollers and python. Project technology: Arduino - This is a microcontroller that support different communication protocols (UART,SPI, I2C) to ...

Software Three sets of code are prepared for the system. The first is for the Arduino Uno, which collects sensor data and transmits it via the serial port. The second and third are for HTML and ...