Here is an artistic Arduino project for the fun-minded. The circuit is an Arduino RGB LED controller running on a sweet ‘n’ simple code,but with a little hardware surprise outside the Arduino board.

I had a space of about 12 by 18 inches available, so by leaving a margin of about 2 inches between each light, I could get away with a grid of 7 by 10 lights. That worked perfectly because I had 70.

This guide will walk you through building an interactive light painting device using an Arduino, RGB LEDs (NeoPixel), and an accelerometer. The system creates dynamic light effects when motion is ...

[Synoptic Labs] stumbled upon an RGB light strip with individually-controllable LEDs. The strip uses 5 volts and is controlled by an HL1606. Because the strips are hard to find, this chip is mostly… ...

An Arduino Pro (via common emitter 2n2222 on/off circuits) provides some digital love to the 18 LED columns and is connected to a Velleman Sound-to-light kit which modulates the brightness of the ...

Description: Using an Arduino or a micro controller we can generate cool looking patterns with an led strip with addressable LEDs. In this case I'm using an Arduino uno (clone board) and a strip of ...

Infineon's RGB LED Lighting Shield is one two of Arduino-based evaluation boards created to showcase the capabilities of its ARM-based XMC1000 MCUs in lighting and motor control applications. Unlike ...

Electrical Components The wiring of the RGB LED photometer is shown in Figure 2. The electrical part of the photometer consists of a RGB LED, (41) a light sensor BH1750, (42) and an Arduino ...

This one tickles me for some reason - a flame simulation using the Arduino MKR RGB Shield. And that's about it really - all you need is the shield and an Arduino board to plug it directly into, such ...