In the water level sensor schematic, the common probes connecting the underground tank and the overhead tank to +9V supply are marked ‘C’. The other probe in underground tank, which is slightly above ...

XKC-Y25-V (High and Low Level Output) XKC-Y25-NPN (NPN Output) XKC-Y25-PNP (PNP Output) XKC-Y25-RS485 (RS485 Output) The XKC-Y25-XXX non-contact liquid level sensors are primarily designed for ...

XKC-Y26-V Contactless Liquid Level Sensor Pinout The XKC-Y26-V sensor has a total of 4 pins. Two power pins, one mode select pin, and one output pin. The pinout of the module is as follows: VCC ...

Implementing continuous-level sensing Take the example of a coffeemaker using continuous-level sensing with a capacitive sensor. The continuous-level liquid sensing requires a sensing board primarily ...

This diagram shows the LVDT level sensor attached to the side of a tank using a flat-hook assembly. The high-permeability core follows the position of the stainless-steel float.

Water from the municipal connection fills the tank via a 24V DC electric normally closed inlet valve. A Shelly 1 Mini G3 provides power to the inlet valve in order to open the inlet and allow water to ...

The architecture of multi-sensor data fusion for detecting system in the industry process is presented in this paper firstly. According to the functional characteristic of self-calibration layer for ...

This article proposes an intensity-modulated liquid level sensor (LLS) based on cascaded long-period fiber grating (CLBG) and fiber Bragg grating (FBG) structure with temperature compensation. Its ...