Here is an artistic Arduino project for the fun-minded. The circuit is an Arduino RGB LED controller running on a sweet ‘n’ simple code,but with a little hardware surprise outside the Arduino board.

Circuit Diagram: Connections: Connect the +ve end of the red led to pin 11 then connect the +ve end of the blue led to pin 10 then connect +ve end of the green led to pin 9. Take all the grounds ...

Being able to use one of your old projects to make a new one better can be quite satisfying. [Steve] from Hackshed did just this: he integrated an Arduino based webserver into a new network control… ...

Inside the is a Rainboduino: an Arduino compatible board capable of driving an 8×8 RGB LED matrix. Also stuffed inside the busy box is a 9V battery, rocker switch for the power, and four arcade ...

Connections Description between the RGB LED and the Arduino Nano Board The common anode is the largest pin of the LED and is connected to the 3.3 V port of the Arduino, and the other 3 pins of the RGB ...

An optional RGB LED attempts to copy the shade of whatever object you’re aiming at, providing a handy reference to verify it’s working correctly. “ Watch this video on YouTube.

You can still use these pictures for referance, however. You can also try to replicate the lighting that was done here, using RGB LEDs controlled by an Arduino Uno.

Circuit Diagram: Connections: Connect the +ve end of the red led to pin 11 then connect the +ve end of the blue led to pin 10 then connect +ve end of the green led to pin 9. Take all the grounds ...