The newly released Arduino Leonardo has a few very interesting features, most notably the ability to act as a USB keyboard and mouse thanks to the new ATmega 32U4 microcontroller. This feature isn&… ...

The Linduino has a LTM2884Y-USB isolator module on it so your PC is not electrically connected to the Linduino or its shields or Linear Tech demo boards. Since Linear Tech is also a power supply chip ...

Arduino has shrunk the UNO R4 with the Arduino Nano R4 board equipped with the same 48 MHz Renesas RA4M1 32-bit Arm ...

I used V-USB for a couple of projects with my own code from scratch (i.e. No Arduino etc) and they work fine. I am using Win7 X64+libusb and use Vendor Specific commands only.

As seen in the above schematic, a 5-V DC supply from the USB connector (USB) is routed to two 10-Ω/5-W power resistors (R1 and R2) through an SPST switch (S1) followed by an SPDT switch (S2). Here, S1 ...

Arduino Joystick Module Interfacing Circuit Diagram. The following image shows the circuit diagram for interfacing the Joystick module with Arduino. Connect the VCC and GND pins of the module to the ...

There are 3 basic components required for this project: Arduino board; Micro SD module; DIP switch; Arduino board: The Arduino board it's where the code for our BadUSB will be stored and processed, it ...

Describe the request. I want to enable or disable ESP32-C3 module which is from DFRobot, and it works well under arduino-cli, but once i use arduino-cli monitor -p /dev/ttyACM0 there is no output, ...