It can result from overload, short circuit, or ground fault. An overload is a condition in which equipment or conductors carry current exceeding their rated ampacity. An example is plugging two 12.5A ...

Short-circuit current does not exceed 38 mA. The regulator’s output current may reach 2 to 3 A if a heatsink is used with transistor VT1. Separate green and red LEDs can be used for D2 and D4 if ...

I see techs in the field get the most frustrated when they have a low-voltage short they can’t seem to locate. The challenge techs face with low voltage diagnosis is a combination of poor process and ...

For instance, a 0.9-Ω short applied to a non-current-limited load switch with a 3.3-V input voltage (switch ON resistance being ~100 m)Ω translates into a dissipated power as shown in Eq. 5: ...

You must protect motor circuit conductors against short circuits and ground faults per 430.52 and 430.62 (430.51). To size the branch-circuit conductor for a motor, refer to the requirements in 430.22 ...