Joystick Controlled by STM32 in Arduino IDE This repository contains the necessary code and instructions to set up a joystick controlled by an STM32 microcontroller using the Arduino IDE. Hardware ...

Another example: the AtMega328 has different multi-function pins than STM32 so to have I2C or ADC na specific pins as in original arduino you need to solder / remove some bridges on PCB to route ...

This is a working prototype of a sort-of MVC pattern for Arduino / STM32 which could help with such scenarios. It has been designed to split relevant operations into three domains - Data, Control and ...

The STM32 Nucleo open platform is said to enable affordable prototyping using STM32 MCUs combined with a range of hardware plug-ins through Arduino Nano connectors. STMicroelectronics is extending its ...

Arduino GIGA R1 WiFi board brings the STM32H7 dual-core Cortex-M7/M4 microcontroller found in the Portenta H7 boards to the larger Arduino Mega/Due form factor with up to 76 GPIO pins. As its name ...

4. Connect the breadboard rails to Arduino GND and +5V, and then check that your setup matches that of Figure 10-3. Mounting the Laser. For this project, I’ve attached the servos to a pan-and ...

The Waveshare 1.69-inch IPS touch LCD is a 1.69-inch rounded display with 240×280 resolution and a 262K color range. The display driver (ST7789V2) and touch controller (CST816T) are integrated ...