News

31 thoughts on “ Make Your Own Remote Control LED Light ” Infosec208 says: August 23, 2015 at 11:17 am May want ... to control the Mi Light bulbs (over an Arduino board).
Looking for a simple circuit to control the light intensity of Light Emitting Diodes (LEDs) or similar lighting sources? Here is an Arduino based circuit with three independent pulse width modulated ...
Arduino Uno (or any compatible microcontroller) 178 cm of WS2812B LED strips, with 100 LEDs/m ... Circuit Diagram. The circuit diagram is provided below for reference: Key Connections: ... By pressing ...
So the light over the LDR will automatically control the intensity of Power LED. Below is the flow diagram how this will work, upside arrow sign is indicating "increasing" and downside arrow sign is ...
Each Bar absorbs approximately 60-65mA at 12V. Here three such LED light bars (one Red, one Green and one blue) are used to complete the circuit. Use a standard 9V battery to power the arduino board, ...
A basic arduino´s application for remote controlling (ON/OFF) bulb lights (led) through a MQTT broker - deibioctavio/arduino-mqtt-control ...
Do not connect 5V pin of the Arduino to the LED strip. Connect DIN and GND pins of the LED strip to digital pin 6 and GND pin of the Arduino, respectively. Make sure the GND pins of LED strip, Arduino ...
In the quest to add some mood lighting in his basement, [Mohonri] found an infrared wireless remote that is able to control several RGB LED strips. The only problem with this remote is the inabilit… ...
This work takes independent research and design of an intelligent light control system that can realize infrared wireless remote control of LED lamp beads. Users can use the buttons on the remote ...