We designed an isolated PCB for 3 relays. By using this Arduino Relay Shield, we can operate 3 AC appliances at a time. We have put a two pin screw terminal blocks (Neutral, NO) for connecting ...

In this Lora project, I have shown how to make the LoRa Arduino ESP8266 control relay using the RYLR896 LoRa module with real-time feedback. So after turning on and off the appliances the receiver ...

Seemingly, this ESP-01 Wi-Fi Relay can be used as a smart on/off switch for handling any device connected to it. When a pre-programmed ESP module is inserted into the relay board, it not only serves ...

[Kaushlesh Chandel] prototyped a few projects on his Arduino that use an HD44780 Character LCD. Wanting to keep these projects in one piece, but not sacrifice his Arduino board, so he etched his ow… ...

As Arduino Nano board (Board2) cannot provide sufficient current to drive a relay, a 5V DC power adaptor is used for powering the relay module/board (RM1). To use 5V DC power adaptor with the circuit, ...

Circuit Diagram: Relay module: Connect the IN pin of the relay to a GPIO pin (e.g., D1 or GPIO5). ESP8266 or ESP32: Make sure the relay module's VCC and GND are properly connected to the board.

If you have a bare RGB LED instead of a module in a breakout board, you can make something akin to a module by attaching resistors on each of the color pins. The resistance value varies per ...