The field of radio control has benefited much from the onward march of technology. Where a basic 2-channel setup would once have cost hundreds of dollars, it’s now possible to get a high-end … ...

This cable is used by the RC transmitter to connect the radio transmitter to the reciever. Once this is done, a small connector has to be made using headers, perfboard and shrinkwrap. This connector ...

2 joystics, 1 knob, 1 switch. 6 RC channels, each channel encoded with 10 bits. Optional failsafe on throttle channel. The schematics are in the 'schematics' folder. The major components are as below.

Arduino RC (Remote Control) Transmitter Handset Purpose: This 3d printable shell and Arduino source code will let you build your own RC transmitter for planes, quadcopters, rovers, boats, robots, etc.

After downloading an rc-switch Arduino library and making a quick stop at his local radio shack to get a 433.92 radio receiver to decode the signal, he reverse engineered the weather station so he ...

Key Takeaways: Transmitter Build a 3D printed Arduino-based pistol-grip radio transmitter for RC cars, boats, etc. 8 channels of control inputs, 1KM maximum range, 48-hour battery life. Uses parts ...

Long-range RC transmitter “I started using Bluetooth devices like the HC-05 modules, but I found that these sometimes randomly disconnected.

After construction, power up the circuit from the concerned RC channel (e.g. channel 5) of the receiver, turn on your transmitter, and verify that moving the R/C stick (or an auxillary toggle switch ) ...

A trainer cable for the RC transmitter had to be made to connect the radio of the student to the teacher so that the model can have share control. For the Arduino end of the cable, a little connector ...