This is a where a Power Mosfet comes in. With the help of the Power Mosfet, we can use the low voltage output from the Arduino ports to control high voltage/current loads -the popular “12V LED strips” ...

Arduino has shrunk the UNO R4 with the Arduino Nano R4 board equipped with the same 48 MHz Renesas RA4M1 32-bit Arm ...

I made this Arduino project that allows to turn ON and OFF LEDs using a cheap IR remote control as a preparation for the next big step: disassemble my girlfriend’s chinese LED lamp and replace its ...

The UDOO has the same pins as the Arduino DUE, as well as the DUE's ARM SAM3X processor, which is dedicated to the GPIO pins. Android 4.0.4 or Linux (Ubuntu 11.10) runs on a second processor, a ...

This is a simple project. It uses an Android device to switch an LED driven by the Arduino. Connectivity is provided by the Bluetooth module inserted in the breadboard. But one look at the UI on th… ...

To be eligible for prizes, selected challengers must post at least five updates on the element14 Community and a final ...

The mod works using a MAX7219 chip and Arduino Uno ATmega328 board, which control the two 8×8 LED matrixes making up the eyes. Each matrix is wired up to the MAX2719 chip–expect a lot of cables ...

Arduino Micro has some extra leds that it is tricky to programme. Like almost all Arduinos, has a built-in led – the green one on the left in the photo. And it has a pair of yellow leds – called TX ...

A Raspberry Pi Zero Shield that will connect a Zero or Zero W module to a 3.3V or 5V compatible Arduino board, is available from US-based Burgessworld Custom Electronics. The two boards are connected ...