'''This uses the GCB hardware implementation of IC2 for Microchip devices. '''Two types are supported as shown below. This example is using "#define LCD_IO 10" '''- Set LCD_I0 to 10 for the YwRobot ...

'''This uses the GCB hardware implementation of IC2 for Microchip devices. '''Two types are supported as shown below. This example is using "#define LCD_IO 10" '''- Set LCD_I0 to 10 for the YwRobot ...

The I2C LCD display library can be downloaded from this link. After downloading the zip file install I2C LCD library in the Arduino IDE by sketch->import library.This library can also be used with ...

This circuit needs only four connections to equip a BASIC Stamp II with an LCD module.The BASIC Stamp II has 16 I/O lines. To connect an LCD module to a BASIC Stamp II board, you would need eight data ...

The Waveshare 1.69-inch IPS touch LCD is a 1.69-inch rounded display with 240×280 resolution and a 262K color range. The display driver (ST7789V2) and touch controller (CST816T) are integrated ...

Waveshare has hundreds of different modules and somehow decided not to clearly list the ones that are compatible with the Quad GPIO expander board… But after some research, we can see the modules ...