News

It is a pretty common first project to use an Arduino (or similar) to blink an LED. Which, of course, brings taunts of: you could have used a 555! You can, of course, also use any sort of oscillato… ...
This project demonstrates how to blink an LED connected to an Arduino Uno using a simple Arduino sketch. The LED blinks on and off at regular intervals determined by a specified delay. /program: ...
Setup 1. Run Arduino. 2. Open the LED blink example sketch: File > Examples > 1.Basics > Blink. You should see a window like in Figure 2. 3. Choose Tools > Board, then select your board, like in ...
This project shows how control the brightness of a red LED using an Arduino Uno board. int ledPin = 13; // Define the pin where the LED is connected void setup() { pinMode(ledPin, OUTPUT); // ...
This is tutorial number 1 from our series of Arduino tutorials and in this part I will talk about blinking an LED using the one already available on the Arduino Uno board or using an external LED to ...
When you read “Arduino wristwatch”, you fall into the trap of envisioning an Arduino UNO clumsily strapped to someone’s wrist. [Marijo Blažević’s] creation is much more ...
Because the Arduino is executing the pre-installed software called Blink. Congratulations, you’ve now gotten you’re Arduino powered and running the Blink program that is flashing the LED.