Connect the positive (anode) leg of the buzzer to digital pin 8 on the Arduino. Connect the positive (anode) leg of the LED to digital pin 13 on the Arduino. Connect the ground (GND) of the ultrasonic ...

Arduino Nano. HC-SR04 Ultrasonic Sensor. 5V Active Buzzer. Light-Emitting Diode. Current Limiting Resistor. 9V Battery. Slidder switch / on-off switch. Breadboard. Connecting wires. PVC Pipe. Up next, ...

The set-up process is very simple, and best understood by referring the wiring diagram. If everything goes right,you should see the burning eye of the red LED when there is no object in the safe-zone ...

When the object comes within the range of the ultrasonic sensor the buzzer beeps and the led lights up indicating detection of the object . COMPONENTS USED 1.LED (red) 2.resistor -330ohm 3.buzzer - 5v ...

1 Arduino Ultrasonic Sensor (HC-SR04) 1 buzzer; Ultrasonic sensor, mounting circuit; It is a very simple circuit. On the one hand, we will have all the alerts, acoustic and visual, and on the other ...

Here is a simple 3 Ultrasonic sensor-based Human following robot using Arduino Uno code that you can use for your project. This code reads the distances from three ultrasonic sensors (‘frontDistance’, ...

[Klaus] wanted some sort of aid for parking his car, and after running across a $4 ultrasonic sensor, decided to build his own speaking distance sensor (.de, Google Translation). Inside [Klaus]&#82… ...

In this review of the Maker Uno RP2040 board with the Arduino IDE we could blink LEDs, control RGB LED lights, press the user button to turn on one LED or make the buzzer output some melody, control a ...