The transmitter part consists of Arduino UNO and the 434 MHz Transmitter module. An external LED can be used but on board LED would be sufficient. The design of the Transmitter part is as follows. The ...

1 x Standalone ATmega328P-PU w Reset Button and LED (or Arduino Uno R3); 1 x TWS-BS RF Transmitter Module (434 MHz); Breadboard + wires. Receiver: 1 x Arduino Uno R3; 1 x RWS-371 RF Receiver Module ...

On your journey in building your first RC transmitter and receiver, you may encounter some issues along the way when putting one together, so among the key takeaways below, you may find some useful ...

The Arduino-powered AM transmitter was fairly straightforward. As Kainka explained, a transmitting tube was driven hard by the carrier signal ... “You will be well within the guidelines so long as the ...

In this project we have built a Doorbell using 433MHz RF links and Arduino. RF Transmitter and Receiver Circuit. If you are trying to build a simple RF based wireless switch, then this project is for ...

A new development board aims to bring the latest satellite navigation technology into the hands of makers. NavSpark combines a 100-MHz, 32-bit microcontroller (MCU) board with a small global ...

Arduino open source long-range RC transmitter. 12:14 pm January 31, ... but it worked best with one long range version as the receiver, and a standard module for transmitting.

A concentric antenna structure with transmitter (Tx) and receiver (Rx) isolation characteristic is proposed. For both cases that Tx and Rx use the same frequency or different frequencies, Tx leakage ...

Using multiple antennas in the transmitter and/or in the receiver and exploiting all available knowledge about the channel in both the receiver and transmitter, the link capacity can be increased or ...