Here is an artistic Arduino project for the fun-minded. The circuit is an Arduino RGB LED controller running on a sweet ‘n’ simple code,but with a little hardware surprise outside the Arduino board.

Arduino Uno RGB LED Resistor 10K ohm Resistor 221 ohm Jumper wires Pushbutton switch Breadboard Rotary potentiometer. Procedure: You have to wire the schematic as shown in the diagram. Wire the RGB ...

When you need to quantify the color of an object, you’ve got quite a few options. You can throw a Raspberry Pi camera and OpenCV at the problem and approach it through software, or you can bu… ...

A simple color picker for controlling the built-in RGB LED on the Arduino Nano ESP32. This project allows you to select colors and display them on the onboard RGB LED. This is my first learning ...

Inputs HSV color values via the serial monitor. Converts HSV to RGB using Arduino code. Controls an RGB LED connected to Arduino pins (typically pins 9, 10, and 11) through PWM to display the color.

Welcome to our blog post on interfacing the WS2811 (5V) RGB LED strip with Arduino! In this guide, we will walk you through the process of connecting and controlling WS2811 LED strips using an Arduino ...

Off the shelf RGB colour pickers allowing you to extract and objects RGB values can range from a few hundred dollars to thousands depending on your needs.

An RGB LED module uses a special kind of LED light that can emit three colors: red, green, and blue. However, you can make any color you could possibly think of by changing which one is turned on and ...

Pi Time is a psychedelic clock made out of fabric and Neopixels, controlled by an Arduino UNO. The clock started out as a quilted Pi symbol. [Chris and Jessica] wanted to make something more around… ...

the RGB LED color mixer is a project that is suitable for the beginner Arduino users who is interested in building an interactive gadget to mix colors. The simple circuit combines three potentiometers ...