Arduino code which utilizes a PID algorithm to control the flow of gas in a vacuum chamber. Arduino uses a Pirani gauge to measure pressure, and converts the gauge's voltage output to mTorr. From ...

3 thoughts on “ An Arduino Controller For Hot Air Handles ” Brian says: September 4, 2020 at 8:51 am Uh, you might wanna put a fuse or two in there, somewhere. Report ...

Connect the VCC (Red) and GND (Black) wires of the water flow Sensor to the 5v and Gnd of Arduino, and link Pulse Output (Yellow) wire of the water flow sensor to Arduino’s digital pin 2. Note that ...

Brushless motors are ubiquitous in RC applications and robotics, but are usually driven with low-cost motor controllers that have to be controlled with RC-style PWM signals and don’t allow fo… ...

If you're a typical developer, your familiarity with the Arduino open-source hardware platform may be limited. Arduino, based on the Atmel AVR microcontroller, is positioned as an alternative to ...

Considering microfluidic technology, this work has been innovated to consist of monitoring, temperature control and cooling sections. The work consists of peltier a module attached to the heatsink and ...

The Arc-Controller is compatible with about any Arduino, or other micro controller such as Raspberry Pi. It runs an ATMega328, and is user programmable via the Arduino IDE.