The hub has one 4pin M12 quick-disconnect male connector handling the IO-Link interface and input power, and eight 4pin M12 female connectors each handling two discrete IOs and output power. Discrete ...

NORVI-CEMA-M2 Arduino Micro ATMEGA 32-based programmable controller with digital inputs, and transistor outputs. NORVI Cema Industrial Arduino is the most compact version of the NORVI series. it has 8 ...

In the above figure, the connection diagram for the water level sensor with Arduino is shown. We have connected an LED to the PWM pin6 of the Arduino board and the analog output pin of the sensor is ...

Objective: Object detection The main challenge: PNP sensor is 24Voltages supply and Arduino works properly between 7 to 12Voltages. To overcome : Voltage Divider with Two resistors (R1 10kiloOhm , R2 ...

The Project The purpose of this project is to provide a 4…20 mA output from a PWM signal generated by an ATmega328 microcontroller (and numerous other chips, such as the PICs). One of the more ...

This ensures an output stage that can directly drive a relay with a 22-V switching voltage from a 24-V power supply. The transistors used (a 2N3055 npn and 2N2955 pnp in TO-220 packages) are ...