API TECHNOLOGIES Surge-Gard inrush current limiting NTC thermistors limit the inrush current that occurs when power is applied to a system. Devices reduce circuit failures and lower rectifier costs by ...

This result also applies to many other impedance-type sensors (e.g. resistive, capacitive). Experimental data from a three-thermistor circuit shows approximately 16 mK (160 ppm) linearity over a span ...

As a result, NTC thermistors are not always the ideal solution to be used as inrush current limiters (ICLs) – especially in power supplies. Thanks to their characteristic resistance curve, PTC ...

In resistance-mode linearization, a normal resistor sits in parallel with the NTC thermistor and linearizes the combined circuit's resistance. If you choose a resistor value that's equal to the ...

BCcomponents NTCLE350E4 is AEC-Q200-qualified NTC thermistor with PEEK-insulated, NiFe leads and low thermal gradient. Designed to withstand temp. up to +185°C. Is for automotive applications. NiFe ...

Figure 1: Schematic diagram of the analog thermostat project. In this design, an NTC thermistor was used that has a nominal value of 2.2 kΩ at 25°C. To obtain a pseudo-linear response, the NTC was ...

This paper investigates analog linearization circuits for NTC thermistors, and the theoretical limits to linearity performance. In theory, by using multiple ide ...