In this tutorial we are going to use the TSOP1838 IR receiver to build an IR Remote Decoder using Arduino. The hex code for every button will be logged to Microsoft Excel Sheet. This simple IR Remote ...

Arduino sketch which decodes infrared remote pulses and prints them out to the serial port. The output format shows the total number of pulses and the actual pulses in a on, off, on.. style. e.g.

Fig. 2: Circuit diagram for IR decoding Fig. 3: TSOP 1738 pinout. VCC, GND and OUT pins of TSOP 1738 are connected to 5V, GND and pin No. 11 of Arduino, respectively. After completing the connections, ...

[firestorm] used the Arduino IRremote library to decode the button presses on his remote. After uploading the IR receive demo included in the library, the Arduino spit out hex codes of what the IR ...

Decodes long IR codes, for example from air conditioner / heat pump devices. Shows the timings, the symbols, and also the decoded signal for certain air conditioners ...

The same setup can also be used as a “limited” universal IR remote control. Let me show how you can hack/make (decode/encode) an IR remote control with the help of a couple of low-priced components!

How to connect the TSOP4838 to an Arduino to read the transmitted codes. By using a cheap integrated IR receiver/decoder device (the venerable TSOP4838), most of the hard work is done for you!

I made this Arduino project that allows to turn ON and OFF LEDs using a cheap IR remote control as a preparation for the next big step: disassemble my girlfriend’s chinese LED lamp and replace its ...

IR Sensor Pinout. The IR sensor has a 3-pin connector that interfaces it to the outside world. The connections are as follows: VCC is the power supply pin for the IR sensor which we connect to the 5V ...

Connect Arduino to the PC and select the correct COM port in Arduino IDE. Select the correct board from Tools->Board menu in Arduino IDE and upload the programs to Arduino. For first part, upload ...